Crispy, Tender and Delicious Brussels Sprouts Recipes (2024)

FAQs

Why won't my brussel sprouts get crispy? ›

If you want your roasted Brussels sprouts to be seriously crispy, you need to crank up the heat. Roasting at a low temperature won't allow them to brown properly, so you want to get that oven nice and hot before tossing in your baking sheet. Follow this tip: Roast Brussels sprouts at a minimum of 400°F.

It turns out that giving Brussels sprouts a good soak can help them to cook evenly throughout. Not only will the sprouts have a better texture after being soaked, but you won't have to choose between burning the outside and undercooking the inside.

Beyond bitterness, parboiling your sprouts can speed up cooking times, softening the leaves to tender, right down to their core (without turning them to mush) and making it easy for you to focus on perfectly crispy and caramelized sprouts in less time in the oven, sauté pan, or out on the grill.

There's nothing wrong with soft and chewy Brussels, but if your goal is the type of crispy Brussels that they're serving at your favorite bistro you MUST thoroughly dry the surface of the sprouts before sautéing and/or roasting them. If they are wet they will steam instead of crisp. Surface area is your friend!

This could be caused by using too little oil for roasting. You need a nice coating of oil—enough to make the heads shiny or if they're cut, enough oil to get inside the folds of some of the leaves. Without oil, Brussels don't brown and soften—they dehydrate.

Contributed by Whole Foods Market, Inc. To prepare, soak Brussels sprouts in a bowl of cold, salted water for 20 minutes. Preheat oven to 400°F.

Parboiling Brussels sprouts before frying is a good technique to ensure they cook evenly and become tender on the inside while allowing for a crispy exterior when fried. However, it's not always necessary but we think it works here to create a soft middle and crisp exterior in the pan.

Your first step should always be to blanch the brussels sprouts. This is basically when they get submerged in boiling water just for a few minutes, not until they're fully cooked, but just enough to take away some of the bitterness. Blanching also softens them and preserves their beautiful bright green color.

Place the Brussels in a large saucepan over a high heat for a couple of minutes, then, once the pan is nice and hot, cover with boiling salted water. Boil for 5 minutes, or until just tender but with a little bite. Taste to check – they should be slightly undercooked.

The fiber in Brussels sprouts—over 3 grams per cup, according to the USDA—helps regulate blood sugar levels, support digestive health, and feed the beneficial gut bacteria. Gut bacteria are tied to positive mood, immunity, and anti-inflammation, according to Harvard University's School of Public Health.

Should you cut brussel sprouts in half before cooking? ›

One of the most common ways to cut a Brussels sprout is in half or quarters. By doing so, you reduce the size of the sprouts, speeding up cooking.

Method. Tip the brussels sprouts into a pan and add a couple of cm water and a pinch of salt – a large pan works better so they're not piled up too high. Cover and bring the water to the boil, turn down to a simmer and cook with the lid on for 3- 5 mins depending on size.

The usual cause is poor soil, lack of growth and especially the use of non-hybrid cultivars. Only hybrid cultivars can be relied on to produce firm sprouts. Excessive nitrogen fertiliser is not implicated in loose sprout formation.

The usual problem with sprouts is that the soil in which they have grown was not firm enough. Sprouts like to grow in soil that is really well compacted and they will then form tight buttons. If the soil is too loose the buttons will be loose too.

Watering just right is key to preventing mushy Brussels Sprouts leaves. It's like a dance with nature—know the steps. Water thoroughly until it drains from the bottom, then let it be. Overwatering is a no-go; it's the fast track to Soggyville.